Resurrecting Lenovo LePhone 3GW100 is easy. To establish JTAG connection
make sure battery is charged enough and hold Power On button during
initiation of JTAG connection.
To resurrect Lenovo LePhone 3GW100:

• Solder JTAG cable to Lenovo LePhone 3GW100 JTAG pads;
  
• Insert battery;
  
• Make sure Lenovo LePhone 3GW100 is selected in the list of models;
  
• Press and hold Power On key;
  
• Click Resurrect button;
  
• Wait till software signals a successful operation completion;
  
• Disconnect power supply, de-solder JTAG wires;
  

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

[You must be registered and logged in to see this link.]