[You must be registered and logged in to see this link.]

- Added: World first! ZTE MF612 unlocking by code reading via LAN cable
- Added: World first! ZTE MF612 repair/rebuild lock area via LAN cable
- Added: World first! ZTE MF612 recovery logins&passwords,wi-fi keys,pin code,etc via LAN cable
- Added: ZTE MF210(miniPCIe) modem unlocking by code reading
- Added: Alcatel Android based direct unlock/backup restore(free for box
users):
OT-908,OT-909,OT-910,OT-980,OT-981,OT-990,OT-A990,OT-C908,OT-C990,OT-MOVE,OT-V958
- Added: ZTE F230 compilation support "Oct 15 200810:20:51Feb 21 200821:00:00KYRZ"
- Changed: LAN Routers procedure to bypass Windows 7 security checks which block Winsock communication

Alcatel android maual (po kablu )

* Alcatels Qualcomm Android unlock code calculator *

1. Enter IMEI number
2. Enter ProviderID(see example picture on support: AlcatelMTK.jpg)
3. Click EXECUTE to get code(s)
NOTE: Not all providers maybe supported(try read codes by cable)

* Alcatels Qualcomm Android unlock by cable *

1. Power on phone and connect to USB cable
2. Download and install drivers from support: [You must be registered and logged in to see this link.]
3. Not all drivers may install (required Modem and DIAG only)
5. Select from dropdown list UNLOCK and click EXECUTE
6. Reboot phone


Alcatel Android by USB cable unlocking log :

Code:
Looking for phone...
Phone detected.
Phone Model: OT-990
Phone IMEI: 356131-04-XXXXXX-X
Firmware Version: M76XX-TSNCJOLYM-60501005 1 [Feb 03 2011 05:00:00]
Compiled date: May 16 201117:36:11Feb 03 201105:00:00TSNCJOLY
Reading simlock data...
Connecting to server...
Phone unlocked successfuly.
All Done! - Time:00:00:01
******** ENG ZTE LAN routers Unlocking/repair instructions *********

1. Insert Simcard from different operator than locked router
2. Connect router to LAN port and power ON and wait 30 sec to full boot
3. For UNLOCK, unmark "Repair Lock Area"
4. For REPAIR damaged simlock area, mark "Repair Lock Area"
5. Click UNLOCK
6. Login to router and enter 16 digit calculated code
[!] If router cannot be detected or gateway is 0.0.0.0, mark "Manual IP
number" and enter router IP number manually(check user manual for
default IP number)

******** ENG ZTE LAN routers recovery login/password *********

1. Connect router to LAN port and power ON and wait 30 sec to full boot
2. Mark "Recovery Login/Pass" option
3. Click UNLOCK
[!] If router cannot be detected or gateway is 0.0.0.0, mark "Manual IP
number" and enter router IP number manually(check user manual for
default IP number)


ZTE MF612 unlock log :

Code:
Looking for phone... [LAN]
Adapter no: 1 , card IP: [192.168.0.5] , gateway: [192.168.0.1]
Phone detected. on IP: [192.168.0.1]
Phone Model: MF612
Phone IMEI: 353370-03-XXXXXX-X
Firmware Version: [MODEM] : BD_P678A1_GWV1.0.0B04 / PCBP670M6V1.0.0
Firmware Version: [ROUTER] : CR_ORANGE_PL_P670M6V1.0.0B01
Compiled date: Jan 29 201012:49:22Jan 28 201012:00:00KP673M2
Reading data...
Trying clear lock counter...
Connecting to server...
Sending certificate...
*********************************
Server calculation result:

Unlock Code: 3667604233922427

### Login to router and enter unlock code###
All Done! - Time:00:00:10


ZTE MF612 repair log :

Code:
Looking for phone... [LAN]
Adapter no: 1 , card IP: [192.168.0.5] , gateway: [192.168.0.1]
Phone detected. on IP: [192.168.0.1]
Phone Model: MF612
Phone IMEI: 353370-03-XXXXXX-X
Firmware Version: [MODEM] : BD_P678A1_GWV1.0.0B04 / PCBP670M6V1.0.0
Firmware Version: [ROUTER] : CR_ORANGE_PL_P670M6V1.0.0B01
Compiled date: Jan 29 201012:49:22Jan 28 201012:00:00KP673M2
Auth. received.
Access authorization...
Sending certificate...
Reading simlock data...
Connecting to server...
*********************************
Server calculation result:

Service Unlock Code: 707088FA7630CFE4

### Login to router and enter unlock code###
All Done! - Time:00:00:06
Best Regards KKTeam