i saw many teams confusing users that they give MTK android Pattern unlock

Very Funny [You must be registered and logged in to see this image.]

we give free Solution for Flash now we give solution for all reset and pattren unlock

1. remove install Battery

2. Press and Hold Vol+ and Vol-

3. Press power On Button

4. you will see a secret Menu

5. Here Select Reset and press OK

All Done

Enjoy

no need invest Money for this free utility just use free software or hard reset

MT6516 flashing tutorial


Here you can find the instructions on how to flash your MT6516 based
phone. Although example images shown here refer to HOT HD9, you can
flash other phones based on this MediaTek chipset, with the correct ROM
files, of course. Make sure you read everything carefully and know what
you are doing. Don't blame me for any damage on your phone.


What's needed:

• Flashing cable (USB to UART cable with PL2303 chip)
  

[You must be registered and logged in to see this image.]

• USB data cable
  
• SP Flash Tool
  
• SN Write Tool (alternatively Maui META or WriteCode can be used as well)
  

And now the tutorial...

• Make sure that you have already installed the Profilic PL2303 drivers needed for the USB to 3,5 mm headphone cable.
  
• Open
  SP Flash Tool for MT6516 and chose which system you want to flash in
  your HD9. Under project you are able to choose Android or Windows
  Mobile.
  
• Make sure you have selected the right COM port is selected and that baud rate is set to 921600 bps.
  
• Click on Format to literally format NAND flash of your HD9.
  

[You must be registered and logged in to see this image.]

• Then turn off your HD9, remove the battery and plug the serial cable to the PC and the jack to the phone.
  
• Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Format All is Processing.
  

[You must be registered and logged in to see this image.]


After the red progress bar is complete, the real format will begin and a green progress bar will appear.

[You must be registered and logged in to see this image.]

When the process is finished a new window will pop up, just press OK to continue.

[You must be registered and logged in to see this image.]

• Now remove the battery once again, keeping the serial cable connected to the PC and the phone.
  
• Click Download and make sure that every file needed to flash Android / Windows Mobile is selected:
  
  
  
  • Android
    
    
    
    • BK Modem DB / RS Modem DB - BPLGUInfoCustomApp_MT6516_S01_MAUI_10A_W10_48
      
    • BK AP DB / RS Modem DB - APDB_MT6516_S00_2010_20
      
    • PRELOADER - preloader_bird16_a10y.bin
      
    • UBOOT - uboot_bird16_a10y.bin
      
    • BOOTIMG - boot.img
      
    • RECOVERY - recovery.img
      
    • SEC_RO - secro.img
      
    • ANDROID - system.img
      
    • LOGO - logo.bin
      
    • USERDATA - userdata.img
      
    </li>
    
  • Windows Mobile
    
    
    
    • BK Modem DB / RS Modem DB - BPLGUInfoCustomApp_MT6516_S01_MAUI_09B_W10_16_MP_V 5
      
    • BK AP DB / RS Modem DB - APDB_MT6516_S00_2010_20
      
    • FLASH BIN file - flash.bin
      
    • XLDR - MT6516_mldrnandforMTK.nb0
      
    • EBOOT - MT6516_EBOOTNAND.nb0
      
    </li>
    
  </li>
  

[You must be registered and logged in to see this image.]


Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Download is Processing.

[You must be registered and logged in to see this image.]


After the red progress bar is complete, there will appear a purple progress bar.

[You must be registered and logged in to see this image.]

Right after the purple progress bar is complete, you’ll have to connect
the normal USB data cable. The message will appear under the progress
bar: “ Please insert USB cable in x seconds”.

[You must be registered and logged in to see this image.]

After plugging the USB data cable into the phone the download will
start. The first time you connect the cable, your computer will detect a
new hardware and you’ll have to install MT6516 USB VCOM drivers.

[You must be registered and logged in to see this image.]

There will be one yellow progress bar for every part of the ROM (preloader to userdata / xldr to eboot).

[You must be registered and logged in to see this image.]
After all is complete a new window will appear with a report of the download. The following popup should appear:

[You must be registered and logged in to see this image.]

Now you have completed the process of flashing the ROM into your HD9.
Because the NAND flash was formatted in the beginning of the flash
progress, you have now to re-write your phone IMEI1 and IMEI2.

Open SN Write Tool and make sure that the correct COM port is selected and baud rate is set to 115200 bps.

[You must be registered and logged in to see this image.]

• While keeping only serial cable connected to the phone, remove the battery and wait 10 seconds with the battery removed.
  
• Click Start and you be asked to enter IMEI1 and IMEI2. Enter the correct number in the correct fields.
  

[You must be registered and logged in to see this image.]

After entering the correct IMEI numbers and clicking OK, you have to
replace the battery and press power button on the phone. If you have
flashed Android, => Meta mode will appear in the bottom left of the
screen.

[You must be registered and logged in to see this image.] Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.


Update:
Here's a trick if you want to flash just one part of the ROM, in this
case the recovery. Without formatting flash, deselect all parts except
the one you want to flash.

[You must be registered and logged in to see this image.]


After that, you just have to click start and turn on the phone with USB
data cable connected (in this case you don't need the USB serial
cable).

Here is all setups

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]