we give free Solution for Flash now we give solution for all reset and pattren unlock
1. remove install Battery
2. Press and Hold Vol+ and Vol-
3. Press power On Button
4. you will see a secret Menu
5. Here Select Reset and press OK
All Done
Enjoy
no need invest Money for this free utility just use free software or hard reset
Momin_Telecom Admin And Forum Owner
Posts : 3062 Points : 8626 Thanks : 49 Join date : 2011-07-22 Age : 38
Subject: MT6516 flashing tutorial Thu Mar 15, 2012 3:07 pm
MT6516 flashing tutorial
Here you can find the instructions on how to flash your MT6516 based phone. Although example images shown here refer to HOT HD9, you can flash other phones based on this MediaTek chipset, with the correct ROM files, of course. Make sure you read everything carefully and know what you are doing. Don't blame me for any damage on your phone.
What's needed:
Flashing cable (USB to UART cable with PL2303 chip)
Then turn off your HD9, remove the battery and plug the serial cable to the PC and the jack to the phone.
Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Format All is Processing.
Click Start, replace the battery and press power button for a few seconds until you see the red progress bar along with the message Download is Processing.
Right after the purple progress bar is complete, you’ll have to connect the normal USB data cable. The message will appear under the progress bar: “Please insert USB cable in x seconds”.
Momin_Telecom Admin And Forum Owner
Posts : 3062 Points : 8626 Thanks : 49 Join date : 2011-07-22 Age : 38
Subject: Re: MTK Android Pattren Unlock [No Need any Box or PC] Thu Mar 15, 2012 3:08 pm
After plugging the USB data cable into the phone the download will start. The first time you connect the cable, your computer will detect a new hardware and you’ll have to install MT6516 USB VCOM drivers.
There will be one yellow progress bar for every part of the ROM (preloader to userdata / xldr to eboot).
[You must be registered and logged in to see this image.] After all is complete a new window will appear with a report of the download. The following popup should appear:
Now you have completed the process of flashing the ROM into your HD9. Because the NAND flash was formatted in the beginning of the flash progress, you have now to re-write your phone IMEI1 and IMEI2.
Momin_Telecom Admin And Forum Owner
Posts : 3062 Points : 8626 Thanks : 49 Join date : 2011-07-22 Age : 38
Subject: Re: MTK Android Pattren Unlock [No Need any Box or PC] Thu Mar 15, 2012 3:08 pm
Open SN Write Tool and make sure that the correct COM port is selected and baud rate is set to 115200 bps.
After entering the correct IMEI numbers and clicking OK, you have to replace the battery and press power button on the phone. If you have flashed Android, => Meta mode will appear in the bottom left of the screen.
[You must be registered and logged in to see this image.]Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Update: Here's a trick if you want to flash just one part of the ROM, in this case the recovery. Without formatting flash, deselect all parts except the one you want to flash.